How To Reset A Viking Dishwasher [Quickly & Easily]

Are you struggling with your Viking dishwasher? Does it seem like it's not working as it should?

Whether your dishwasher isn't starting, the lights are blinking, or it's not cleaning your dishes properly, a reset can help get it back to working order.

If you're still experiencing issues with your Viking dishwasher after resetting it, a more serious problem may require professional attention.

However, in most cases, a quick reset can be all it takes to get your dishwasher back to its normal functioning state.

So, the next time you're having trouble with your Viking dishwasher, try resetting it first and see if that solves it.

Where to Find the Reset Button for Viking Dishwasher?

Locating the reset button on a Viking dishwasher is straightforward, though it may vary slightly by model.

The reset function is commonly integrated into the "Start" or “On/Off” button on the dishwasher's control panel.

Holding down the "Start" button for a few seconds or toggling the “On/Off” button, you initiate a soft reset, which helps refresh the dishwasher's system.

For more complex issues, perform a power cycle by turning off the dishwasher's main power switch or the circuit breaker to ensure a complete reset.

It's always a good idea to refer to the owner's manual for precise guidance tailored to your dishwasher model.

Why Would You Need to Reset Your Viking Dishwasher?

Resetting your Viking dishwasher is a practical step to troubleshoot and resolve common issues. Here are some circumstances where a reset might be necessary:

Poor Washing Performance

If your Viking dishwasher isn't cleaning the dishes well, a reset may be a way to troubleshoot.

Sometimes, the dishwasher's system may experience temporary glitches that affect its cleaning performance.

A reset can help clear these glitches, potentially improving the cleaning efficiency of the appliance.

Error Codes on Display

Error codes on your Viking dishwasher are a way the appliance communicates issues. Here are some common ones you might see:

• Error Code E1: There's a problem with the water valve.
• Error Code F1: There's a heating problem.
• Error Code F2: Water leakage is detected.
• Error Code E2: There's an issue with the water pressure.

Resetting your dishwasher, after addressing the issues reflected, can often clear these error codes.

It's a simple action to decode and address the messages flashing on your dishwasher's display.

Power Outage

A power outage can disrupt your Viking dishwasher's normal operation. When the power comes back on, your dishwasher might need a reset to start working properly again.

A reset helps clear any temporary glitches caused by the power outage, ensuring your dishwasher returns to its usual routine.

Regardless of why you need to reset your Viking dishwasher, it's important to follow the proper steps to ensure it's reset properly and safely.

In the next section, we'll take a look at some of the steps you can take to reset your Viking dishwasher quickly and easily.

How to Quickly and Easily Reset a Viking Dishwasher [Step-by-Step]

You might need to perform two main types of reset: a soft reset and a hard reset.

Soft Reset

Soft resetting a Viking Dishwasher can help resolve minor operational glitches or reset the dishwasher settings.

There are three primary methods to perform a soft reset on a Viking Dishwasher, depending on the model you have. Below are the steps for each method:

Using the Start Button

1. Find the "Start" button on your Viking dishwasher's electronic control panel.
2. Press and hold down the "Start" button for approximately four seconds.
3. Release the "Start" button to trigger the reset. This action should reset your dishwasher control panel and clear any minor errors.

Pressing the 'On/Off' Button

1. Open the dishwasher door to access the control panel.
2. Locate the "On/Off" button on the control panel to turn off the dishwasher.
3. Wait for approximately 1 minute to allow the dishwasher’s internal system to reset.
4. Press the “On/Off” button again to turn the dishwasher back on, completing the soft reset process.

Flipping the Main Power Switch

1. Start by opening the dishwasher door and finding the main power switch.
2. Turn off the dishwasher by flipping the main power switch to the "Off" position.
3. Pause for at least 1 minute to let the dishwasher's internal electronics reset.
4. Now, turn the power back on by flipping the main power switch to the "On" position.
5. Your dishwasher should now be reset, ready for you to start a new cycle or adjust settings as needed.

Hard Reset

If the soft reset does not resolve the issue or you encounter persistent issues with your Viking Dishwasher, you may need to perform a hard reset.

Here’s how:

1. Find the electrical circuit breaker for your dishwasher in your home's electrical panel.
2. Turn off the circuit breaker to cut off power to the dishwasher completely.
3. Wait for about 5 minutes to ensure a complete reset of the dishwasher's electronics.
4. After 5 minutes, turn the circuit breaker back on to restore power to the dishwasher.
5. Test your dishwasher to see if the issue has been resolved.

If the problem continues, it's best to contact Viking's customer support for additional assistance.

What Issues Would Prevent My Viking Dishwasher from Reset?

If you're having trouble resetting your Viking dishwasher, there could be a few issues at play. Here are some common problems that could prevent your dishwasher from resetting:

Power Supply Issues

If your dishwasher isn't receiving power, it won't be able to reset. Make sure the dishwasher is plugged in and that the circuit breaker hasn't tripped.

If you're unsure, try plugging another appliance into the same outlet to see if it works.

Control Panel Issues

A damaged or malfunctioning control panel may hinder the reset process. Look for any visible damage or signs of wear and tear. If you're unsure, contact a professional technician.

Faulty components

The presence of faulty components in your dishwasher might prevent it from resetting. Common issues could range from a damaged inlet valve to a clogged spray arm.

Inspect your dishwasher for any obvious damages and troubleshoot accordingly.

Other Troubleshooting Tips on Viking Dishwasher

If resetting your Viking dishwasher didn't solve the problem, there are a few other things you can try before calling a technician.

• Check for any obstructions in the spray arm, ensuring it rotates freely, and clean the spray holes if they are clogged with grease or grime.
• Ensure you are not overloading the dishwasher or blocking water jets with improperly placed dishes. Load your dishes to maximize water flow and spray arm movement.
• Make sure the power cord is properly plugged into the wall socket.
• Check your fuse box for a blown fuse or tripped circuit breaker if the dishwasher won’t power on.
• Regularly clean the dishwasher filter to prevent drainage issues.
• Check and clean the drain pump and hose, or inspect for any damages if the dishwasher isn't draining correctly.

Related reading: Can A Dishwasher Drain Hose Run Under The Floor [And How To]?

Final Thoughts

As you've learned, resetting your Viking dishwasher is an easy process that can save you time and money.

By following the steps outlined in this article, you can quickly and easily reset your dishwasher and possibly get it back up and running in no time.