How To Reset A Beko Ice Maker [Quickly & Easily]

Resetting your Beko ice maker can resolve a variety of issues, from production problems to general malfunctioning.

Not only will this article walk you through the process, but we’ll also share some helpful troubleshooting tips and insights along the way.

So, let’s jump right in and get your ice maker back on track together!

Where To Find The Reset Button For My Beko Ice Maker

If you’re experiencing issues with your Beko ice maker, finding the reset button can be a simple and effective solution to get it back on track. 

However, Beko ice makers generally don’t have a designated reset button. Instead, resetting is usually done by powering the unit off for some time and then turning it on.

This will reinitiate the ice-making process and resolve any minor functional issues.

While the specific reset steps can vary slightly depending on the model, this process is typically straightforward and doesn’t require any special tools or technical knowledge.

It’s always best to check the manual provided with your specific ice maker model for detailed procedures.

Instances You Need To Reset Beko Ice Maker

There are times when it becomes necessary to reset your Beko ice maker.

If you notice it’s not working as it should, such as producing ice cubes irregularly or not at all, that’s a good indicator that a reset might help.

Here are some instances that indicate you may need to reset your Beko ice maker.

Power Outage Recovery

A sudden power outage can cause your Beko ice maker to stop functioning correctly.

When the power is restored, the ice maker may not immediately return to its normal operation due to the electrical interruption.

In this case, resetting the ice maker should help it get back on track.

Decreased Ice Production

Another instance that might call for a reset is when your Beko ice maker is making less ice than usual, or the ice cubes it produces are smaller or oddly shaped.

This issue could be related to the water supply, a blockage in the system, or a malfunctioning sensor. 

Once these are resolved, a reset is the final step to help the machine recalibrate and resume normal ice production.

Curious about how long it usually takes for an ice maker to start churning out ice after a reset? Read this article.

How To Quickly And Easily Reset A Beko Ice Maker (Step-By-Step)

Here’s how you can reset your Beko ice maker, ensuring you can get back to enjoying chilled drinks in no time.

Step 1: Check the Wire Shut-Off Arm

Locate the wire shut-off arm located on the side of the ice maker. It should be in the downward position to signify ‘On.’

If it’s not, push it down to activate the ice-making process.

Step 2: Look for a Reset Button

See if your ice maker has a reset button. It’s rare, but if your model has one, press and hold it for about 8-10 seconds.

Step 3: Power Down Without a Reset Button

If there’s no reset button, turn the ice maker off. This can be done by pressing the power button or moving the wire arm to the upward ‘Off’ position.

Leave the unit off for 10-15 minutes.

After the wait, turn the ice maker back on to complete the reset process. It should now be reset and ready for use.

If you’re having trouble with your ice maker because the water line keeps freezing up, check out this guide to troubleshoot and fix the issue quickly.

What Issues Would Prevent My Beko Ice Maker From Reset

If your Beko ice maker is not responding to a reset, several issues could be at play. Here are some possible reasons and corresponding solutions:

Feeler Arm Stuck in Position

The feeler arm (also known as the wire shut-off arm) is crucial for detecting ice levels.

If it’s stuck or frozen in place, it may not properly signal the ice maker to resume operation after a reset.

Remove any obstruction and make sure the arm is clean and can move to its full range.

Incorrect Position of Feeler Arm

For the ice maker to resume operation, the wire shut-off arm must be in the down position.

If it’s mistakenly left in the up position, the ice maker will not activate after a reset.

Electrical Issues

If there’s an electrical fault within the ice maker, this could affect the feeler arm’s operation.

For example, if the motor that moves the arm is not functioning, the reset process will not proceed normally.

Ensure that all electrical connections to the feeler arm motor and controls are secure and not damaged.

If these steps don’t resolve the issue, it’s likely an internal electrical problem that requires a professional technician to diagnose and repair.

Final Thoughts

Resetting your Beko ice maker doesn’t need to be a daunting task.

As we’ve discussed, the process is usually as simple as turning off the ice maker for around 10-15 minutes and then turning it back on.

However, if you’re still experiencing issues with your ice maker, you may need to look for other troubleshooting solutions.

Never hesitate to contact a Beko service technician if you’re unsure about any of the steps or need assistance with your Beko ice maker.