How To Reset A Whirlpool Ice Maker

Disclosure: We may get commissions for purchases made through links in this post.

If your Whirlpool ice maker is not making ice, it may need a reset. But how do you reset a Whirlpool ice maker? Let's take a look at how to reset a Whirlpool icemaker below.

Here's how to reset a Whirlpool icemaker:

  1. Remove the ice bucket.
  2. Locate the reset button.
  3. Hold down the reset button until you hear a chime.
  4. Release the reset button.

When your Whirlpool ice maker isn't working, a reset may be all that you need to get it going again. In this article, we will walk you through the steps of resetting a Whirlpool icemaker. In addition, we will answer other frequently asked questions about the Whirlpool icemaker, so read on!

Detail with refrigerator freezer of kitchen appliance, How To Reset A Whirlpool Ice Maker

How to reset a Whirlpool icemaker

Whirlpool is a known name when it comes to kitchen appliances. The company produces a variety of appliances, including dishwashers, microwaves, refrigerators, and of course, icemakers.

If your Whirlpool ice maker isn't working, it may just need to be reset to get it going again. Fortunately, this is a relatively easy process that only takes a few steps. So let's walk you through the process of resetting a Whirlpool icemaker.

ice maker machine in fridge

Remove ice bucket

The first step is to remove the ice bucket from the ice maker. This will give you access to the reset button.

Locate the reset button

Once you have removed the ice bucket, locate the reset button on the control panel. The reset button is typically at the bottom of the ice maker.

Hold down the reset button

Now that you have located the reset button, you need to hold it down until you hear a chime. This chime indicates that the ice maker has started the reset process.

Release the reset button

Once you hear the chime, you can release the reset button. The Whirlpool icemaker will start to go through its cycle and should begin making ice again shortly.

If you find ice built up in the ice maker, put the ice tray back in and close the door.

My Whirlpool ice maker isn't working; what could be the problem?

There may be a more serious problem after you have completed the reset and the ice maker still isn't working. Some possible issues that could be causing your Whirlpool ice maker not to work are:

Repairman Making Refrigerator Appliance In Kitchen Room

The Water Filter Is Clogged

The water filter's sole responsibility is to clean the water before it enters your ice maker. Unfortunately, over time, these filters can become clogged with dirt and debris, which will prevent the water from flowing properly. As a result, your ice maker will not be able to make ice.

To fix this issue, you will need to replace the water filter. You can find replacement filters at most home improvement stores or online.

To avoid this issue in the future, replace the water filter every six months or as recommended by the manufacturer.

Read more: Do Whirlpool Refrigerators Have Water Filters? [And When To Replace Them]

The Ice Maker Is Not Getting Enough Water

cube ice in ice making machine1

If the ice maker is not getting enough water, then it will not be able to make ice. This could be caused by a water leak or low water pressure.

If you suspect a water leak, you will need to check all of the connections and hoses leading to the ice maker. If there is a leak, you will need to repair or replace the damaged part.

Low water pressure can often be fixed by simply increasing the water pressure at your home's main water valve. However, if this does not solve the problem, you may need to call a plumber.

The Freezer Temperature Is Too High

If the freezer temperature is too high, the ice maker will not be able to make ice. The ideal freezer temperature for an ice maker is between 0 degrees Fahrenheit and 5 degrees Fahrenheit.

To fix this issue, you will need to adjust the thermostat on your freezer. However, if you find that the thermostat is already set to the ideal temperature, you may need to call a technician to service your freezer.

Choosing ice-maker programme at refrigerator displayer

The Door Switch Is Faulty

The door switch is a safety feature that prevents the ice maker from working when the freezer door is open. This switch is located on the side of the freezer door and must be engaged for the ice maker to work.

If the door switch is faulty, you will need to replace it. You can find replacement door switches at most home improvement stores or online.

The Freezer Is Too Full

full pack of ice in refrigerator

If your freezer is too full, the air vents could be blocked, preventing cold air from circulating correctly. As a result, the ice maker will not be able to make ice. It could also obstruct the control arm, preventing it from being able to move.

To fix this issue, you will need to remove some of the items from your freezer and ensure that the air vents are not blocked. You should also check the control arm to make sure that it is not obstructed.

The Freezer Is Not Full Enough

On the other hand, if your freezer is empty or only has a few items in it, the ice maker will also not be able to make ice.

This is because the freezer will have to work overtime to maintain the cold temperature, which will prevent the ice maker from functioning properly.

You will need to add more items to your freezer to fix this issue. This will help to insulate the freezer and keep the cold air in.

The Ice Maker Is Turned Off

Ice makers typically have a power switch located on the side or back of the freezer. If this switch is turned off, the ice maker will not be able to make ice.

This also could be due to a faulty outlet or a tripped breaker. To fix this issue, check the outlet to make sure that it is working correctly. If the outlet is not the problem, you will need to check your home's breaker box and reset the breaker.

Clogged Water Line

If the water line is kinked or blocked, it could be preventing water from flowing properly to the ice maker. As a result, your ice maker will not be able to make ice.

You will need to locate the water line and check it for any kinks or blockages to fix this issue. If there are any, you will need to repair or replace the damaged section of the waterline.

Child Lock Is On

If your Whirlpool fridge has a child lock feature, it could be preventing the ice maker from working. This feature is typically located on the refrigerator's control panel and can be turned on or off.

If the child lock is on, you will need to disable it to use the ice maker. To do this, consult your owner's manual for instructions.

The Water Inlet Valve Is Defective

The water inlet valve is responsible for supplying water to the ice maker. If this valve is defective, it will not be able to supply water to the ice maker, and as a result, the ice maker will not be able to make ice.

You can check the water inlet valve by unplugging the fridge and using a multi-meter to test the continuity of the valve. If there is no continuity, the valve will need to be replaced.

Read more: Whirlpool Refrigerator Not Making Ice – What Could Be Wrong?

old valve and tube

How do you manually reset a Whirlpool Icemaker?

If the reset button doesn't solve your problem, you may need to reset your ice maker manually. To do this, turn the icemaker power off by pressing the off button. Next, unplug the fridge and wait a minimum of 5 minutes before plugging it back in.

Once plugged back in, turn the icemaker power on by pressing the on button. Your ice maker should now be reset and should be working properly.

If you're still having issues with your ice maker, there may be a more serious problem that will require professional assistance. You can also reach out to Whirlpool customer service for further assistance.

What position should the ice maker arm be in?

The ice maker arm should be in the up position when the ice maker is not in use. This will tell the icemaker that the bucket is full and won't make more ice.

When ready to use the ice maker, put the arm down to turn it on. The ice maker will then begin to produce ice.

Should The Ice Maker Lever Be Up Or Down?

Wrap it up

Detail with refrigerator freezer of kitchen appliance

In most circumstances, an ice maker reset will solve your problem. However, if your ice maker is still not working correctly, check the mentioned parts in this article. If you're still having issues, reach out to Whirlpool customer service for further assistance.

Leave a Reply