Suppose you have a KitchenAid dishwasher that has seen better days and want to remove it from your kitchen. Before you get started, you should consider basic instructions and a few safety factors. We've researched this question and have discovered well-researched information to share with you!
To remove the dishwasher, start by shutting the power and water sources off and disconnecting all hoses. Then, lower the legs, and pull the appliance forward to remove it from between the cabinets or out from the island.
Are you ready to learn how to remove an old KitchenAid dishwasher? Or how to tell if your dishwasher is worth fixing? These are great questions. Please continue reading; we have well-researched answers to share with you!
Removing An Old KitchenAid Dishwasher
There are several steps to ensure you remove your dishwasher correctly and safely.
Make sure before you get started that your kitchen floor is clear of items, and gather a large piece of cardboard, a crescent wrench, pliers, and an old towel.
- Turn off the electrical supply to the dishwasher at the circuit breaker.
- Unplug the dishwasher from the power socket. Usually, the power socket is located behind the appliance, and you will have to pull the dishwasher forward to access the plug.
- Make sure everything is removed from the appliance.
- Turn off the water supply at the shut-off valve under the kitchen sink.
- Disconnect the old drain hose from the garbage disposal or the sink tail pipe.
- Disconnect the water line hose from the shut-off valve and hot water pipe.
- Open the dishwasher's door, loosen and remove the mounting brackets located at the top of the dishwasher by unthreading the screws with a screwdriver.
- Lower the dishwashers' legs by turning them counterclockwise until the legs are as low as possible.
- Pull the dishwasher forward onto a large piece of cardboard to prevent the floor from being damaged.
Where Can I Find My KitchenAid Dishwasher's Model Number?
Generally, KitchenAid dishwasher model numbers are located on the left side of the door panel.
What's The Difference Between A Dishwasher Model And Serial Number?
Great question! It is important to remember that the model and serial numbers are not interchangeable and have specific uses. The model number could be comprised of letters and numbers.
The purpose of the model number is to identify the type of appliance and allow the owner or repair tech to find and purchase the correct parts and perform the necessary repairs.
Not all models, even from the same company, are equal. The parts for one dishwasher may not fit another model, or worse, will damage the appliance altogether.
The serial number differs significantly from the model number because it records the year and week the appliance was manufactured.
For example, the first three numbers of the initial six numbers determine the year and the week the machine was manufactured.