As a homeowner, you may be wondering why your LG dishwasher keeps turning off and how the problem can be fixed. Luckily, we have done some research on this issue for you, and here is what we found.
The following are things you can do if your LG dishwasher keeps turning off:
- Check the door latch.
- Check for blown fuse.
- Examine the thermal fuse.
- Check the control panel.
- Check for tripped fuse.
- Inspect the motor.
- Replace the vent and fan.
Fixing this problem can be easy or difficult depending on the cause. Keep reading to get detailed information on how to deal with a faulty LG dishwasher.
What To Do If LG Dishwasher Keeps Turning Off?
If your LG dishwasher turns off constantly, you need to find a solution to the problem as soon as possible so it doesn't get worse. Here are what to do if your LG dishwasher continues turning off:
Check The Door Latch
The door latch is the first place to check if your dishwasher keeps turning off. Always make sure it is shut. If your door latch is broken, then your dishwasher will keep turning off.
To get your dishwasher running again, you need to replace the latch. Replacing it is very simple as the only tool needed is a screwdriver.
Check For Blown Fuse
Another reason why your dishwasher keeps turning off is if you have blown a fuse. Aside from turning off, your dishwasher won't resume its cycle if there's a blown fuse.
You can find out if you are dealing with a blown fuse by checking the control panel to see if there are any blinking lights. If the control panel is dark, it means the dishwasher is not getting any power.
Examine The Thermal Fuse
You can also check the thermal fuse,. It can be seen at the back of the control panel. Before you disassemble your panel, ensure you have disconnected the power.
A bad thermal fuse can cause the dishwasher to keep turning off. The thermal fuse helps to protect the dishwasher from overheating. When the thermal fuse notices that the heat is too much, it turns off automatically in order to prevent consequent motor damage.
If the thermal fuse is blown, you will need to replace it. So you should find out whether it is blown before deciding it is the reason why your dishwasher keeps turning off.
Aside from overheating, a blown thermal fuse can also be caused by water leaks, faulty dishwasher components, and worn-out internal wiring.
Check The Control Panel
Without the control panel, your dishwasher cannot run its cycle. A faulty control panel will make your dishwasher short circuit.
To know that the issue is coming from the control panel you have to see blinking lights on it. If all looks normal but your dishwasher keeps turning off, then you need to reset the panel.
Check For Tripped Fuse
The circuit breaker of your home will trip automatically if a unit is consuming too much energy. If the dishwasher has not been shutting off before and your door is in perfect working condition, the issue might be because of a tripped fuse.
To be sure whether your dishwasher keeps turning off because of a tripped fuse, you can take a look at the indicator lights to see if they are on. Make sure to fix the fuse if it is tripped.
Inspect The Motor Or Pump
If you have thoroughly checked all the mentioned areas and no source has been found, then you should check if your motor or pump is faulty. A dishwasher requires enough water and pressure in order to wash your dishes.
When the motor of your dishwasher is damaged, it won't produce enough water pressure, thereby causing the dishwasher to keep turning off. Faulty motors are mostly caused by issues with the circulation pump or excess build-up of soap.
If it is not attended to, it will deteriorate over time and this may damage the seal, thereby causing water leaks. The most efficient way to solve this problem is by replacing it.
Replace The Vent And Fan
During the drying process, what keeps your dishwasher running at its peak is the vent and fan. They work by forcing out the hot air.
When the fan does not work, there is an accumulation of air which prevents dishes from drying and causing your appliance to turn off. The recommended fix for this is a replacement.
How Do I Reset My LG Dishwasher?
You can reset your LG dishwasher using these simple methods that won't take too much of your time:
- Click the power button to turn off the appliance and then turn it on after some time.
- Turn off the circuit breaker that is connected to the dishwasher and wait for some seconds before turning it back on.
- Click the power button and begin a new cycle.
- If a storm shuts off the power, you can check and turn on the circuit breaker that is linked to the dishwasher.
If you can't handle fuse boxes or circuit breakers, seek the help of a professional.
What Size Power Cord Do I Need For A Dishwasher?
The size of the power cord used for a dishwasher varies. If your dishwasher is 15 amp, you will need to get a #14 or #12 wire. But if you want to wire a dishwasher of 20 amp, you will need a wire of 12 gauge.
Note that your breaker will determine the size of the wire. Most times, the circuit breaker will turn off in the case of power surge. Make sure to use a dedicated circuit of at least 20 amps when installing a dishwasher.
Can You Pull Out A Dishwasher Without Disconnecting It?
No, you cannot pull out your dishwasher without disconnecting it. Here is how to safely remove a dishwasher:
- Disconnect the water supply: Detach the two pipes that connect the dishwasher to the plumbing system.
- Detach the drain line: The dishwasher is also linked to the plumbing system through a drain line. Find the rubber hose and disconnect it.
- Loosen the mounting brackets: Usually, the dishwasher is held by some metal brackets located under the kitchen's cabinet lip. Find it and loosen it.
- Unscrew the dishwasher's legs: You need to unscrew the leg of the dishwasher before you can move it out of its location, and you need to lower it as well.
- Pull out the dishwasher: Carefully pull the dishwasher out of the cabinet. Since the dishwasher sits pretty well on the subfloor, you will have to lift it slightly in order to clear the floor covering's edge. Lift gently when taking the dishwasher out of the cabinet, you don't want to scratch the floor.
It is advisable to cover the flooring using a drop cloth when removing the appliance.
Does An LG Dishwasher Have To Be On Its Own Circuit?
The LG dishwasher needs to be on its own circuit, and this dedicated circuit cannot supply any other device. This circuit supplying the dishwasher should also have a circuit breaker of at least 15 amps.
The reason for this is that connecting more than one electrical appliance to a circuit can lead to power overload which can cause fire or other electrical damage.
Other home appliances like garbage disposals, ovens, and refrigerators need their own circuit. Some modern kitchens have not less than seven 20-amp circuits so that potential disasters can be prevented. These circuits can accommodate all common household appliances.
How Long Does An LG Dishwasher Last?
The lifespan of a dishwasher on average is about 9 - 16 years. However, the lifespan of your dishwasher depends on some factors which include how frequently you use it.
Just like other machines, the dishwasher needs to function regularly in order to keep all the parts in order. There are other ways you can make your appliance last longer. This involves basic maintenance and consulting experts for repairs.
There are some dishwasher problems that will require the attention of a professional technician. Fixing or replacing a dishwasher can be expensive, but a home warranty can be helpful.
To Wrap Up
If you notice that your LG dishwasher keeps turning off, all you need to do is check the door latch, fuse, control panel, motor, and vent. You can contact a professional if you can't fix the problem by yourself.
If you enjoyed reading this post, here are similar articles you may like: