Getting to know how the bigger appliances in a kitchen work can be complicated. Are you wondering whether or not your KitchenAid refrigerator has a reset button but don't know where to find it? Well, we've done plenty of research to find you the answers and have them here for you. Let's check this out.
Yes, KitchenAid refrigerators will have a reset button. Typically, you can find this by locating the ''water filter' or 'filter reset' button and holding them down for a few seconds. Another way to reset a KitchenAid fridge is to unplug it for about ten minutes, so if you can't find a reset button, there are alternative ways to do this.
As we begin, we will cover all things KitchenAid refrigerators and discuss how to reset your appliance. Whether you're new to the brand or think it's time for a reset, we're here to offer some help. With that said, let's dive right into this topic!
How Do I Reset My KitchenAid Refrigerator?
If you think it's time for a reset, you can certainly do this on a KitchenAid refrigerator. As we said, you want to find either the 'water filter' or 'filter reset' buttons and make sure to hold them down for about 8-10 seconds.
Alternatively, you can also unplug your refrigerator from the wall and let it sit for around ten minutes before plugging it back in, which also works as a reset.
With that said, you don't want to do this if you have a full refrigerator as your food could start to spoil, so make sure that everything inside can handle 10-20 minutes without cooling.
How Do You Reset The Control Board On A KitchenAid Refrigerator?
Another idea to troubleshoot a KitchenAid fridge is to try and reset its control board. To do this:
- Power off your appliance by unplugging it or turning off the circuit breaker.
- Wait 5-10 minutes, and then power your refrigerator back on.
- Make sure the cooling function on your fridge is turned on.
- Test your KitchenAid's control board, and if everything's okay, you're all set!
Something to note, you only want to do this if your refrigerator has trouble cooling, so if there is another issue at hand, refer back to your fridge's product manual.
How Do I Run Diagnostics On My KitchenAid Refrigerator?
Running diagnostics shouldn't be difficult for those wanting to check their KitchenAid fridge for issues. To start:
- Press the control 'power' button and the 'filter reset' button on your fridge.
- Hold these buttons down for around three seconds.
- Press and hold the 'filter reset' button again for two seconds.
- Once you hear a beep, your refrigerator will now show you the diagnostics report.
Although you don't necessarily need to run diagnostics often, doing this is a great way to see how your KitchenAid refrigerator operates and whether something is wrong, so we recommend it.
How Do I Fix My KitchenAid Fridge That Is Not Cooling?
If, after resetting and running diagnostics on your fridge, it still won't cool down, the next thing to do is check its evaporator fan. Once you find this fan, spin its blade to see if it moves.
If the blade can move, your evaporator fan's motor is fine, so this isn't the issue. However, if you try to spin the blade and it doesn't move, this means the motor in your appliance's evaporator fan has died and needs to be replaced.
Again, if you aren't comfortable performing this test, you can certainly call in a specialist to inspect your KitchenAid fridge instead, so that's another idea.
Do All Refrigerators Have A Reset Button?
Unfortunately, not all refrigerators will have a reset button. Luckily, KitchenAid does include some variation of a reset button on their appliances, but this isn't always the case.
Like we said earlier, you can also try and unplug your refrigerator for about ten minutes to reset it, so you don't necessarily need a button to do this.
That said, every fridge is different, so if all else fails, make sure to read your appliance's user manual.
Will Unplugging A Fridge Reset It?
Yes, unplugging a refrigerator is one way to reset it. You can typically do this for around 10-15 minutes and then plug your appliance back into the wall, essentially giving it a factory reset.
With that said, it is important to allow your refrigerator to sit completely turned off for at least ten minutes for the reset to work, so keep that in mind.
Not giving your appliance enough time to reset won't fix any of the issues at hand but instead could make them worse.
How Often Should You Reset A Refrigerator?
In general, you don't want to reset a refrigerator unless necessary. Considering that this process will revert your appliance's settings to their original state, overdoing it could damage your fridge.
Of course, if your refrigerator isn't cooling down or has another technical issue, a factory reset can be helpful, but try not to overdo it.
Furthermore, if you notice frequent problems, your refrigerator could be defective, which in that case, we recommend reaching out to the manufacturer.
What Does Resetting A Fridge Help With?
The most common reason for resetting a refrigerator is to help fix temperature-related problems. Considering that a fridge needs to remain cold 24/7, it's inevitable for issues to happen.
That said, doing a factory reset can help to give your appliance a reboot, which will usually get things working again.
A reset also allows your fridge a chance to defrost and return to room temperature, which can be beneficial to its temperature control mechanisms.
How Long Does A Compressor Last On A Refrigerator?
You can usually expect a refrigerator compressor to last around 8-10 years. Considering this is one of the essential parts of a fridge, your entire appliance will be affected if yours develops a problem.
That said, if you maintain your compressor well and have it checked annually, it could last much longer than a decade, so good upkeep is important.
According to Compressors Unlimited, it's common for a refrigerator's compressor to exceed ten years with proper maintenance, so this can make a difference.
How Do You Know If Your Refrigerator Compressor Is Bad?
Most times, a bad compressor will be noisy. We're not talking slight humming but rather loud whaling or rattling. A bad compressor will also overheat regularly, so if your fridge feels hot, it could be time for a replacement.
Furthermore, a faulty compressor will click on and off more than usual, so there are plenty of signs to watch out for. That said, paying for a new compressor can set you back anywhere from $100-$500, so this isn't always a cheap fix.
Are KitchenAid Refrigerators Easy To Use?
Yes! KitchenAid refrigerators should be very easy to operate. Considering this brand has a large following, KitchenAid is known to be extremely user-friendly and reliable.
On top of that, KitchenAid refrigerators offer dedicated customer support, so if you have any questions, you can reach out to them. The brand scores a 3.4 out of 5.0 on Consumer Affairs, which for a large appliance is pretty good.
How Long Will A KitchenAid Refrigerator Last?
On average, a KitchenAid refrigerator will last between 15 and 17 years. Considering that most large appliances only tend to last about 10-12 years, this is impressive.
Again, every fridge will age differently depending on how you maintain it, so make sure to have your refrigerator inspected regularly.
It's also a good idea to fix parts on your fridge as soon as issues arise to prevent your entire system from degrading.
Do KitchenAid Refrigerators Come With A Warranty?
Yes! All KitchenAid refrigerators will come with a one-year warranty. Starting from the day you buy your fridge, KitchenAid promises to replace any defective/faulty parts (excluding the water filter) for 365 days.
On top of that, KitchenAid will pay for factory-specified replacement parts and repair your fridge needs, which is a nice bonus.
For the water filter, your fridge will come with a 30-day warranty, which starts the day you purchase your fridge. This is pretty standard, regardless of brand, so make sure to test your water filter within one month.
To Wrap It All Up
Whether you have a Kitchenaid fridge or want to get one, it's essential to know how to reset it. We found that Kitchenaid refrigerators will have a 'water filter' or 'filter reset' button you can use to reset them.
To do this, you want to press and hold these buttons for about ten seconds. You can also try troubleshooting your appliance by running a diagnostic test, which we recommend doing.
Regardless, make sure to regularly check your fridge for issues, and don't be afraid to reach out to KitchenAid directly with product/warranty questions.
Made it to the end? Check out these helpful related kitchen posts below!
Do Refrigerators Have Air Filters? [And Where To Find Them]
How Old Is My Refrigerator? Here's How To Find Out!
This Post Has One Comment
The cold settings for my Kitchenaid fridge & freezer (KRBR109ESS01) can no longer be adjusted. They are at 7 & 4. The change button no longer respond.